shatara@memit.dec.com (Chris Shatara) (09/03/89)
I started to run into some strange doings under GS/OS V3.0. My first
problem is with Purge-o-matic.
I took the suggestion that was posted here on using POM with Deluxe Paint
II. This worked fine. Problem is that sometimes it doesn't. I had on
several occasions encountered a "GS/OS system Error" when I use POM to
start up POM or SHRConvert 2.1 I find that if I power down the system
keep it off for a few seconds and then turn on the power, it will
sometimes work and things are back to normal. When it fails on DP-II it
also fails on SHRConv.2.1 The error message is:
GS/OS SYSTEM ERROR
ADDRESS = $00E284 LC BANK $0
ERROR CODE = $0002
This is for DP-II. I get a different address for SHRC 2.1 I haven't
noticed whether the address is the same for different occurances. I have
1.25 M of memory, I've installed the system via the installer. I also
tried setting the RAM disk setting to 0. I have an APPLE expansion memory
card.
The other problem I have I've already discussed in a separate topic. That
is encountering an
INITIALIZATION ERROR --->0201
when attempting to run DiskTimerGS. I don't know if this is related to
the above problem or not.
Anyone out there have any thoughts on these problems.
Thanks in advance for your help.....Chris
=============================================================================
| Chris Shatara | Internet: shatara@memit.dec.com |
| | shatara@memit.enet.dec.com |
| Opinions expressed are | DEC Easynet: memit::shatara |
| mine and mine only! | UUCP: ...!decwrl!memit!shatara |
=============================================================================prl3546@tahoma.UUCP (Philip R. Lindberg) (09/05/89)
From article <755@mountn.dec.com>, by shatara@memit.dec.com (Chris Shatara): > I started to run into some strange doings under GS/OS V3.0. My first > problem is with Purge-o-matic. > > I took the suggestion that was posted here on using POM with Deluxe Paint > II. This worked fine. Problem is that sometimes it doesn't. I had on > several occasions encountered a "GS/OS system Error" when I use POM to > start up POM or SHRConvert 2.1 > > Anyone out there have any thoughts on these problems. I'm not sure if my experiences are directly related but I'll share them anyway. I also got a GS/OS system error when running SHRConvert's POM. And on one execution it bombed to the monitor. BUT, this only happened when I switched the SHRConvert-Finder.Icons it to my Icon dir.!! AND as soon as I started getting weird problems a little bell went off in my head and Dave's words came back to me, "Don't mess with Sys. 5.0's Icons!" So I swapped back and haven't had narry a problem since.... I had several other "transitional" problems when executing other applications and transitioning back to the Finder. If you are using somebody's Finder.Icons (besides Apple's), I suggest you switch back and see if your problems go way. > Thanks in advance for your help.....Chris +---------------------------------------------------------+ | The Apple //'s will live forever!! | | Phil Lindberg snail mail: 13845 S.E. 131 ST | | INET: prl3546@tahoma.UUCP Renton, WA 98056 | | UUCP: ..!uw-beaver!ssc-vax!shuksan!tahoma!prl3546 | | Disclaimer: I don't speak for my employer (and I not | | sure they even know I exist....) | +---------------------------------------------------------+