TMPLee@DOCKMASTER.NCSC.MIL (02/26/90)
(I forgot which in the 30 messages ago this one was, so don't have a return address.) a) To get AEPC 2.0 software call Applied Engineering's sales number and fork over $25. b) Once you have that you can take care of the Finder's constantly polling the Transdrive by disabling it (as far as the GS is concerned) by using a new utility in the 2.0 software. You can do this and leave RAMAEPC still usable; they have even modified the RAMAEPC driver so that it does not initialize on a re-boot. c) The Transdrive still does not seem to be usable if you have the TranswarpGS at warp speed; no big deal, however -- you can still get into the GS CDA's when you are running the PCT and switch speed in midstream, even after you've gotten the disk error (Abandon, Ignore, Retry?) message.