ForthNet@willett.UUCP (ForthNet articles from GEnie) (03/06/90)
Date: 03-04-90 (21:50) Number: 2996 To: ALL Refer#: NONE From: JOHN BING Read: (N/A) Subj: CNC FORTH Status: PUBLIC MESSAGE I AM LOOKING FOR ANY AND ALL INFORMATION CONCERNING CNC FORTH AS PER ARTICLE IN THE JOURNAL OF FORTH VOLUME3,#4 1986 AS IN ARTICLE BY JOHN MULLEN - IS THERTE A LISTING OF CNC-FORTH IN THE NET ----- This message came from GEnie via willett through a semi-automated process. Report problems to: 'uunet!willett!dwp' or 'willett!dwp@gateway.sei.cmu.edu'
ForthNet@willett.pgh.pa.us (ForthNet articles from GEnie) (03/30/91)
Date: 03-18-91 (08:43) Number: 1538 of 1557 (Echo)
To: GARY SMITH Refer#: 1514
From: JACK WOEHR Read: NO
Subj: OTIS ELEVATOR IN FORTH? Status: PUBLIC MESSAGE
Conf: FORTH (58) Read Type: GENERAL (+)
Phil Koopman writes:
-> The GOOD NEWS is that I finally have a job after Harris canned the
-> RTX team. I'll be working for United Technologies Research Center in
-> Hartford CT doing embedded control system R&D. United Technologies
-> owns Otis Elevator, Carrier Air Conditioning, Pratt & Whitney jet
-> engines, Norden Sonar & Radar, et al. I don't know how much or if
-> I'll be using Forth.
Well, it will be easy for the general public to tell if
you *do* get to use Forth, Phil! All those buttons saying "DOOR CLOSE"
and "ALARM SEND" will be unmistakeable ... :-)
=jax=
NET/Mail : RCFB Golden, CO (303) 278-0364 VESTA & Denver FIG for Forth!
<<<>>>
-----
This message came from GEnie via willett. You *cannot* reply to the author
using e-mail. Please post a follow-up article, or use any instructions
the author may have included (USMail addresses, telephone #, etc.).
Report problems to: dwp@willett.pgh.pa.us _or_ uunet!willett!dwp