ForthNet@willett.UUCP (ForthNet articles from GEnie) (02/23/90)
Date: 02-20-90 (16:27) Number: 450 To: RAY DUNCAN Refer#: NONE From: SEAN O'DONOHUE Read: 02-20-90 (16:42) Subj: VAX BASED FORTH Status: PUBLIC MESSAGE Hello, I am an FAE for Harris Semiconductor. I have a customer who is interested in doing some RTX2000 developement on a VAX system. I wanted to know if LMI has a VAX based forth and if the RTX-DS developement system could be ported over to run on a VAX. --- * Via ProDoor 3.1 NET/Mail : LMI Forth Board, Los Angeles, CA (213) 306-3530 Date: 02-20-90 (16:42) Number: 451 To: SEAN O'DONOHUE Refer#: 831 From: RAY DUNCAN Read: NO Subj: VAX BASED FORTH Status: PUBLIC MESSAGE We do not sell a VAX-based Forth at this time, however we would be willing to do one as a custom port. NET/Mail : LMI Forth Board, Los Angeles, CA (213) 306-3530 ----- This message came from GEnie via willett through a semi-automated process. Report problems to: 'uunet!willett!dwp' or 'willett!dwp@gateway.sei.cmu.edu'
ForthNet@willett.pgh.pa.us (ForthNet articles from GEnie) (03/18/91)
Date: 03-12-91 (09:50) Number: 1496 of 1502 (Echo)
To: GARY SMITH Refer#: 1471
From: RAY DUNCAN Read: NO
Subj: FORTH FOR VAX 11/780 Status: PUBLIC MESSAGE
Conf: FORTH (58) Read Type: GENERAL (+)
>Does anyone have a pointer for Forth for VAX/VMS.
Klaus Flesch of Forth Systeme in Breisach, West Germany developed such a
Forth about 6 or 7 years ago. I believe he still sells the source code
on request. You can contact him via the LMI Forth Board or by sending
FAX to 011-49-7667-555.
NET/Mail : LMI Forth Board, Los Angeles, CA (213) 306-3530
<<<>>>
-----
This message came from GEnie via willett. You *cannot* reply to the author
using e-mail. Please post a follow-up article, or use any instructions
the author may have included (USMail addresses, telephone #, etc.).
Report problems to: dwp@willett.pgh.pa.us _or_ uunet!willett!dwpForthNet@willett.pgh.pa.us (ForthNet articles from GEnie) (03/30/91)
Date: 03-14-91 (08:21) Number: 1503 of 1557 To: ALL Refer#: NONE From: CHARLIE HITSELBERGER Read: (N/A) Subj: VAX FORTH Status: PUBLIC MESSAGE Conf: FORTH (58) Read Type: GENERAL (+) To whomever asked about Forth on the VAX, I have both the fig-Forth which runs under VMS 4.xx, as well as VAX Forthsim/VMS. The fig forth is dodgy (uses blocks, but they're stored in files... only supports VT100... flips on the high bit when displaying a VLIST... not Forth-79 or Forth-83...) and shouldn't be used. Whereas, on the other hand, the VAX Forthsim/VMS V3.2 is awesome. It's got RMS file support, store source in files, system service calls, debugging tools, compiles to native code, optimization, etc... It requires VMS 5.2 or greater to run. Alas, my terminal program does not support Xmodem or Ymodem file transfers, and I have never been able to make Kermit uploads function. If you'll mail me your address and what-not, I'll stick the savesets on your choice of TK-50 or 8mm. Exabyte tape and send them off to you, free of charge. Charlie Hitselberger PCRelay:DCINFO -> #16 MetroLink (tm) International Network 4.10 DC Info Exchange MetroLink International Hub <<<>>> ----- This message came from GEnie via willett. You *cannot* reply to the author using e-mail. Please post a follow-up article, or use any instructions the author may have included (USMail addresses, telephone #, etc.). Report problems to: dwp@willett.pgh.pa.us _or_ uunet!willett!dwp
S47852EF@ETSUACAD.BITNET (Frank Ear) (04/02/91)
On Fri, 29 Mar 91 23:30:29 GMT <zmleb@SCFVM.GSFC.NASA.GOV> said: > Date: 03-14-91 (08:21) Number: 1503 of 1557 > To: ALL Refer#: NONE > From: CHARLIE HITSELBERGER Read: (N/A) > Subj: VAX FORTH Status: PUBLIC MESSAGE > Conf: FORTH (58) Read Type: GENERAL (+) > > To whomever asked about Forth on the VAX, I have both the fig-Forth > which runs under VMS 4.xx, as well as VAX Forthsim/VMS. I'm not that person, but... > Whereas, on the other hand, the VAX Forthsim/VMS V3.2 is awesome. It's > got RMS file support, store source in files, system service calls, > debugging tools, compiles to native code, optimization, etc... It > requires VMS 5.2 or greater to run. Alas, my terminal program does not > support Xmodem or Ymodem file transfers, and I have never been able to > make Kermit uploads function. If you'll mail me your address and > what-not, I'll stick the savesets on your choice of TK-50 or 8mm. > Exabyte tape and send them off to you, free of charge. Since, I don't have direct access to the VAX machine, could you figure out if you are on bitnet or Internet on that machine, and if so, contact me at the internet/bitnet address below so that we can arrange an alternate method of file(s) transfer? Thanks in advance, Frank C. Earl Internet : s47852ef@etsuacad.etsu.edu BITNET : s47852ef@etsuacad