bmaraldo@watmath.waterloo.edu (Commander Brett Maraldo) (06/19/88)
I need a high voltage power transformer with these characteristics:
Primary: 115VAC Secondary: ~1300 VAC, 10mA
It is for a He/Ne laser power supply. The transformer I was using developed
a short in the primary (it was a Spectra-Physics 417-701-E 114-P-51D 23952).
Spectra Physics claims that that is an old number and don't seem to be too
co-operative; Hammond manufacturing claims they do not have a transformer
such as I require (they do have a 1250VAC, 200mA, but I am uninterested in
killing cows). Please help.
Brett L Maraldo
--
-------- Unit 36 Research ---------
"Alien Technology Today"
bmaraldo@watshine.waterloo.edu
{allegra,decvax,ihnp4,utzoo}!watmath!watshine!bmaraldo
--
-------- Unit 36 Research ---------
"Alien Technology Today"
bmaraldo@watmath.waterloo.edu
{allegra,decvax,ihnp4,utzoo}!watmath!bmaraldobrad_bhare_hare@cup.portal.com (06/21/88)
Just about any transformer in the 1200 - 1500 volt range should
work as long as the current rating is correct.
Going to Hammond sounds a little expensive, and maybe a little
slow. There is a good surplus company in Lima, Ohio called Fair Radio
Sales. THey have a very large inventory of xfmrs at dirt cheap prices.
I'm afraid my catalog is out on an extreme long term loan (never to be
seen again), but you could try any one of the amateur radio magazines
for an address and a phone number.
regards,
Brad Hare
sys. eng.
Spectra Physics
P.S.
If you need any further (unofficial) help email me at the above
addr. I am with the Infrared Diode Laser division (Laser Analytics)
but I have had some experience with the other product lines from my
academic days.
I am limited to information of a non- proprietary nature, but that should still
cover a few problems.gene@cooper.cooper.EDU (Gene (the Spook) ) (06/22/88)
in article <19550@watmath.waterloo.edu>, bmaraldo@watmath.waterloo.edu (Commander Brett Maraldo) says: > Xref: cooper sci.electronics:2524 sci.physics:2457 > > > I need a high voltage power transformer with these characteristics: > > Primary: 115VAC Secondary: ~1300 VAC, 10mA > > It is for a He/Ne laser power supply. The transformer I was using developed > a short in the primary (it was a Spectra-Physics 417-701-E 114-P-51D 23952). > Spectra Physics claims that that is an old number and don't seem to be too > co-operative; Hammond manufacturing claims they do not have a transformer > such as I require (they do have a 1250VAC, 200mA, but I am uninterested in > killing cows). Please help. > > Brett L Maraldo I might suggest making your own transformer. There are plenty of forms available from different manufacturers, and by custom-winding your own, you can play with both output voltage and current. If you want some more info on "how-to" or on some of the projects I've done, just email me and let me know. I'll be glad to help. (By the way, I don't come in to read the news often, so please email me a note instead of posting. I have no problems receiving mail (as far as I know), but a lot of my outgoing mail gets bounced back to me.) Spookfully yours, Gene ...!ihnp4!philabs!phri!cooper!gene "If you think I'll sit around as the world goes by, You're thinkin' like a fool 'cause it's case of do or die. Out there is a fortune waitin' to be had. You think I'll let it go? You're mad! You got another thing comin'!" - Robert John Aurthur Halford
aboulang@bbn.com (Albert Boulanger) (06/25/88)
Gene <1342@cooper.cooper.EDU> says: I might suggest making your own transformer. There are plenty of forms available from different manufacturers, and by custom-winding your own, you can play with both output voltage and current. You don't really have to do that. There are plenty of transformers available on the surplus market including ones in this voltage range. For instance, I bought my voltage tripler supply as a kit from Halted Specialties in Sunnyvale and the transformer from H&R. (It was ~2500 V XFMR so I used a variac to supply the XFMR) You just have to know enough of the surplus companies! Maybe I'll make a list of companies when I get time someday. Albert Boulanger aboulanger@bbn.com Albert Boulanger BBN Labs Inc. ABoulanger@bbn.com (arpa) Phone: (617)873-3891
al@cs.strath.ac.uk (Alan Lorimer) (06/27/88)
In article <1342@cooper.cooper.EDU> gene@cooper.cooper.EDU (Gene (the Spook) ) writes: >in article <19550@watmath.waterloo.edu>, bmaraldo@watmath.waterloo.edu (Commander Brett Maraldo) says: >> Xref: cooper sci.electronics:2524 sci.physics:2457 >> >> >> I need a high voltage power transformer with these characteristics: >> >> Primary: 115VAC Secondary: ~1300 VAC, 10mA >> >> It is for a He/Ne laser power supply. The transformer I was using developed Why not use a voltage multiplier - it would be a bit safer than simply transforming up the mains, since then you don't need to worry too much about the insulation in the transformer being good. Maplin Electronic supplies do a laser power supply PCB for about #5.00 (yes I realise you're U.S. based but if needs must.....), and in any case voltage multiplier PCBs are easy to design anyway. The cost of this is likely to be a bit less too, since all you need is a cheap isolating transformer, plus a pile of diodes and capacitors. If you need to know more, or want Maplin's Address/Telephone number, email me. Hope this is of interest Alan. -- UUCP: ...!seismo!mcvax!ukc!strath-cs!al DARPA: al%cs.strath.ac.uk@ucl-cs JANET: al@uk.ac.strath.cs