aad@stpstn.UUCP (Anthony A. Datri) (02/25/89)
I'm adding memory to an AT-style Everex "Magic" multifunction card, and I can't find the floppy that came with it, which contains software that tells you how to set the switches and which banks to install the chips in. I'd greatly appreciate either a copy of this software or the settings and chip placements. The board had one row of 256k chips, but was only using 128k of it to fill base memory to 640k; I bought a set of 64k chips to do that and now want to use the 256k chips for extended memory. -- @disclaimer(Any concepts or opinions above are entirely mine, not those of my employer, my GIGI, my VT05, or my 11/34) beak is@>beak is not Anthony A. Datri @SysAdmin(Stepstone Corporation) aad@stepstone.com stpstn!aad