tonyrich@titanic.cs.wisc.edu (Anthony Rich) (01/12/90)
The GOOD news: Thanks for the many replies to my request for a Cromemco S-100 TUART (dual serial port) board. If anyone else needs one, email me and I'll point you to some people who can supply one. Prices varied from "swap ya for something" to "free, if you pay postage" to about $30. The BAD news: I've gotten ZERO response to my questions about the availability of a CP/M that runs on a Cromemco and boots from 8" and 5.25" Tandon floppies. I still don't know if MICAH (a former supplier) is still in business in Sausalito, CA. (Can somebody out there in CA check? Sausalito is still there, isn't it? :^) My most recent address for MICAH is: Dr. Jerome Freedman MICro Applications & Hardware 15 Princess Street Sausalito, CA 94965. If anyone has Tandon floppy-driver source code (8080/Z80), I might be able to make-do with that. Some other people have also expressed an interest in a version of CP/M for the Cromemco if I can track one down. Thanks in advance for any leads you can provide! Tony -- ------------------------------------------------------------------------ Email: tonyrich@titanic.cs.wisc.edu Phone: 608-271-8450 Disclaimer: The opinions above are mine. Others may agree or disagree. ------------------------------------------------------------------------