jacksonR@batman.moravian.EDU (Ron Ford Jackson) (12/12/90)
WANTED: SMT Advice and USED SURFACE MOUNT EQUIPMENT I work for a company which is about to make a commitment to SMT. We are currently designing a few small circuit boards which will incorporate SMT components. Therefore, we would appreciate any advice or suggestions regarding small scale SMT equipment, manufacturing techniques, cleaning techniques, and PCB design. Also, we are seeking used SMT equipment. We need: - a benchtop solder reflow machine - a manual pick and place machine - a stencil printer - a rework station With particular emphasis on the following vendors; however, we are still open to suggestions: - O.K. Industries Inc. Manual pick and place system p/n SMT-885 & SMT-876 - O.K. Industries Inc. Stencil Printer p/n SSP-75 - 3C Research Inc. Tabletop reflow soldering machine p/n RF-330. RF-221 & RF-110 - Vitronics Corporation Solder reflow oven p/n GP-101 & GP-102 - Transition Automation Print perfect System 2000 p/n PPS-0001 - Pace Incorporated Rework System p/n SMR-25 & SMR-20 - Fritch Manual pick and place system p/n LM-901 - Strategic Products Inc. solder reflow oven p/n Accu-Heat Thanks in advance, Ron Jackson Corby Industries, Inc. ------------------------------------------------------------------------ Ronald F. Jackson CSNET / INTERNET: jacksonR@moravian.edu 1719 Sullivan Trail BITNET: jacksonR%moravian.edu@relay.cs.net Easton, PA 18042 UUCP: ...!rutgers!liberty!batman!jacksonR ------------------------------------------------------------------------