[soc.culture.misc] [WANTED]: APPLE-2 software for DEAF-TTY connections.

Sirald@cup.portal.com (Andrew Lionel Dalrymple) (04/03/89)

 
___________________________________________________________
 
    [WANTED]: APPLE-2 software for DEAF-TTY connections.
 
-----------------------------------------------------------
 
    I'm looking for APPLE-2 software or a BASIC program
that will connect me to a DEAF-TTY.  DTTY uses the BAUDOT
character set (5-bit data words).  APPLE-2 uses the ASCII
character set (8-bit data words).  I need a interface be-
tween the 45.5 baud rate that BAUDOT requires and the 300/
1200 baud rate that I'm set-up with.  I realize that the
"APPLE-CAT" modem accomplishes this between h/w and s/w,
but I'm trying to make due with what I have.
 
    If anyone out there can aim me towards the software
for this (share/freeware?) or actually could port something
simple over into BASIC or ASM/HEX, that would be most ap-
preciated.
 
    If you don't happen to have even the foggiest of what
I am speaking about, but could steer me towards other re-
sources, THAT is also most appreciated.
 
    Please try to reach me at the following addresses; upon
failure to reach me, please post back here.  In advance,
thank you for your time and effort.  You may be the one to
bring friends and family closer together - please give it
a go.
 
 
Cordially,
 
  A. DALRYMPLE             sirald@cup.portal.com
                           sun!portal!cup.portal.com!sirald
___________________________________________________________
 

bobp@babel.SanDiego.NCR.COM (Bob Plubell) (04/05/89)

In article <16635@cup.portal.com> Sirald@cup.portal.com (Andrew Lionel Dalrymple) writes:
>
>    [WANTED]: APPLE-2 software for DEAF-TTY connections.
>-----------------------------------------------------------
>    I'm looking for APPLE-2 software or a BASIC program
>that will connect me to a DEAF-TTY.  DTTY uses the BAUDOT
>character set (5-bit data words).  APPLE-2 uses the ASCII
>character set (8-bit data words).  I need a interface be-
>tween the 45.5 baud rate that BAUDOT requires and the 300/
>1200 baud rate that I'm set-up with.  I realize that the
>"APPLE-CAT" modem accomplishes this between h/w and s/w,
>but I'm trying to make due with what I have.
>___________________________________________________________

I developed and owned a firmware program that interfaces
between "APPLE-CAT" modem and TDD user. It is not
copyrighted yet. The firmware program can also provide an
BSR X-10 to flash signal of telephone ring. Whats more, it
has automatic answer to TDD users.

I'm willing to negotiate with you for using my uncopyrighted
deaf communication program.  Give me an Email, thanks.

Bob Plubell, deaf developer.