MAILER-DAEMON@GOULD9.UUCP (Mail Delivery Subsystem) (03/12/86)
----- Transcript of session follows ----- GROUP=mac POSTER=info-mac + grep -i ^info-mac: /usr/lib/aliases + set info-mac: info-mac@SUMEX-AIM.ARPA FROM=info-mac@SUMEX-AIM.ARPA ORGANIZATION=ARPA network + /usr/lib/news/inews -n local.mac -f info-mac@SUMEX-AIM.ARPA -h inews: No title, ng local.mac from noscvax!brad1.13486e-78cc-milo.UUCP@harvard.HARVARD.EDU (Brad Parker) 554 "| /usr/lib/news/postlocal mac info-mac"... unknown mailer error 1 ----- Unsent message follows ----- Received: by gould9 (4.12/4.7) id AA00803; Wed, 12 Mar 86 23:15:21 pst Received: by cod.ARPA (5.31/4.7) id AA24547; Wed, 12 Mar 86 23:56:16 PST Received: from C.CS.CMU.EDU (c.cs.cmu.edu.ARPA) by nosc.ARPA (4.17/4.7) id AA22577; Wed, 12 Mar 86 23:56:31 pst Received: ID <RALPHW@C.CS.CMU.EDU>; Thu 13 Mar 86 02:13:09-EST Return-Path: <brad%gcc-milo.UUCP@harvard.HARVARD.EDU> Received: from harvard.HARVARD.EDU by C.CS.CMU.EDU with TCP; Wed 12 Mar 86 19:39:06-EST Received: from gcc-milo by harvard.HARVARD.EDU with UUCP; Wed, 12 Mar 86 19:39:18 EST Received: by gcc-milo.ARPA (4.12/4.7) id AA07623; Wed, 12 Mar 86 14:14:48 est Date: Wed, 12 Mar 86 14:14:48 est From: noscvax!brad%gcc-milo.UUCP@harvard.HARVARD.EDU (Brad Parker) Message-Id: <8603121914.AA07623@gcc-milo.ARPA> To: c.cs.cmu.edu!info-applebus@harvard.UUCP Resent-Date: Thu 13 Mar 86 01:59:29-EST Resent-From: AppleTalk Interest Group Moderator <noscvax!Applebus.Directory@C.CS.CMU.EDU> Resent-Sender: noscvax!RALPHW@C.CS.CMU.EDU Resent-To: ;@info-applebus.ARPA Resent-Message-Id: <12190296652.37.RALPHW@C.CS.CMU.EDU> Newsgroups: mod.protocols.appletalk Subject: Re: MPP Summary: Expires: References: <510893318.mss@dartvax> Sender: Reply-To: brad@gcc-milo.UUCP (Brad Parker) Followup-To: Distribution: Organization: General Computer Company; Cambridge MA Keywords: In article <510893318.mss@dartvax> mss@DARTMOUTH.CSNET writes: >I was trying to figure out if I can use the Kinetics box to send to a >random Ethernet host, e.g., I'll put a pup packet into LAP (or DDP) and > -Mark Has anyone figured out how to get efs working on a "random" host? I can get MacIP going because it asks for the internet address (the same as the ethernet address on our net) but efs only asks for two numbers! I need to be able to supply a full ip address, like "1.0.43.240". Any ideas? (It's entirely possible that I'm missing the point here) It seems that the reason MacIP works is that it uses ARP to resolve the appletalk address it should send to to get the host address I supply. Since efs doesn't use ARP, do I need bridge code which will "hardwire" addresses (is this what those funny "presupplied" translations at the end of the kinetics config file are for? Hum....) -brad parker HyperNet Central Services