XBR1YD22@DDATHD21.BITNET (Ralf Bayer {Herz-Baerchi}) (07/01/86)
Hi folks,
I'm experiencing difficulties with the Intersect Ramdisk.
A) System booting when writing to write protected floppy.
Here's the scenario:
I have a 1040 STF with 1 meg Ram and german TOS in Roms. The Ramdisk
is loaded as accesoire. A write-protected floppy is in the disk drive.
When I try to write to that disk, a alarm box pops up. When I remove
the write protection and click "continue", the machine boots. When
I simply click "abort", same outcome.
B) Ramdisk not releasing all the RAM when removed
When I remove the Ramdisk, sometimes not all the RAM is freed again,
so I have to reboot.
Any suggestions/help/hints to the above problems are greatly welcomed.
Also, pointers to the source of the Ramdisk program are appreciated.
Thanks
Ralf Bayer (The Care-Baer)
Computing Center @ the Technical University of Darmstadt, West Germany
Arpanet: xbr1yd22%ddathd21.BITNET@wiscvm.wisc.EDU (personal mail)
#d22%ddathd21.BITNET@wiscvm.wisc.EDU (mailing lists)
BITNET: xbr1yd22 @ ddathd21 (no NETDATA format, need RFC-header)
#d22 @ ddathd21 ( NETDATA format, beware of the
Number sign, it's part of the USERID)
-----------------------------------------------------------------------
> REAL programmers use FORTRAN <
-----------------------------------------------------------------------