kerr@styx.UUCP (Grant Kerr) (09/09/86)
I wish to know if anyone has successfully interfaced an analog RGB monitor to the Atari 520 or 1040. In particular has anyone used the Magnavox? I have seen reports in COMPUTE that indicated SONY had trouble interfacing their analog RGB monitor to the ST and has had to actually design an electronic cable interface. Has anyone had experience in this area? Brent Ostlund Hill Air Force Base, Ut UUCP: seismo!lognet2!oodis01!ostlund ARPA: ostlund@oodis01
wampler@unmvax.UUCP (Bruce Wampler) (09/10/86)
I used a SONY monitor with mine, don't have the model number right here, however. That particular model had a switch in the back for both TTL and analog levels. Apparently you can now get dealers to order the non-standard 13 pin connector, but I had to cut the cable for my monochrome and add an adaptor plug. I can now use the SONY on both my IBM and ST just by switching cables and changing from TTL to analog. No problems excpet no sound from the ST.