gln%munnari.oz@CSNET-RELAY.ARPA (Gary Nelson) (03/08/86)
Does anyone have a general purpose driver for Ridge's DR11-W interface or some code we could look at to help us write our own? We are working on a DAC/ADC system for signal processing and sound synthesis.
jamesm@CS.PAISLEY.AC.UK (James Moir) (03/14/86)
In article <8603071309.AA14338@ucbvax.berkeley.edu> you write: >Does anyone have a general purpose driver for Ridge's DR11-W interface or >some code we could look at to help us write our own? > >We are working on a DAC/ADC system for signal processing and sound synthesis. I don't have a general purpose driver for the DR11-W interface, I am working on a SPEECH RECOGNITION/SYNTHESIS project on a PDP-11/21 with control from a PDP-11/23. I have software to drive an ADC and DAC which is written in SEA assembler (developed at PCT and based on Macro-11). If you think this could be of any use to you then I'll get it in the post to you. James Moir : UUCP ...!seismo!mcvax!ukc!paisley!jamesm DARPA jamesm%paisley.ac.uk
gln%munnari.oz@CSNET-RELAY.ARPA (Gary Nelson) (03/17/86)
Thanks for the offer but I think the PDP-11 code will not be of much use to us on the Ridge 32. We have had several responses that are a bit closer to what we need. Gary Nelson U. Melbourne