JDELSIGNORE@F.BBN.COM.UUCP (05/19/86)
Does any out there have a device driver for an IF-11Q/1822? The IF-11Q/1822 sold by ACC is composed of an XQ/1822 board and an MDMA board. I'm planning on installing the boards in the QBUS of a MicroVAX II running Ultrix. The boards are setup to do Distant Host to an ARPANET IMP. Thanks, John DelSignore JDELSIGNORE@F.BBN.COM P.S. Please respond to me directly as I am not on this mailing list.
dyer@HARVARD.HARVARD.EDU.UUCP (05/20/86)
I might mention that the combination of a Unibus LH-DH/11 and an Able Qniverter for your MicroVAX would do quite nicely, and will run 'out of the box' with the standard 4.2/Ultrix if_acc.c driver. This is especially attractive because no UNIBUS backplane is needed, just a UNIBUS cable from the Qniverter into the LH/DH-11. Perhaps it's not cost-effective for wholly new systems, but it's a great way to avoid trashing newly obsoleted LH/DH-11's when your VAX750's and VAX780's are upgraded to MicroVAX-II's.