hurf@TCGOULD.TN.CORNELL.EDU (Hurf Sheldon) (09/12/86)
We recently connected a VaxstationII & an HP9000/300 via a delni
& after getting the uvax setup correctly we then used the network setup
program on the HP to set it up. What we get now is complete access from the
HP to the uvax but from the uvax to the HP we get "connection refused"
under telnet & just "time outs" on ftp & rlogin. We have set up the host
tables on the uvax for some more HP's not yet connected & when we try to
go to them we get a "host unreachable" so we believe the HP is recognizing
it's address correctly but won't answer.
We have Ultrix1.2 on the uvax & HPUX on the HP. The uvax is set
"broadcast -trailers netmask 0xffffff00" - must be set this way to conform
to local cornell net standards.
Any & all suggestions appreciated.
Hurf Sheldon Arpa.css: Hurf@ionvax.tn.cornell.edu
Lab of Plasma Studies
369 Upson Hall phone: 607 255 7267
Cornell University
Ithaca, N.Y. 14853