MARCHANYRC@VTVAX3.BITNET (RANDY MARCHANY) (12/05/86)
We have over 10 VAX systems and an IBM 3090 model 200. The majority of the Vaxes run VMS 4.4 (although we have one running Ultrix) and the IBM systems run VM/SP HPO 4.2 with CMS release 4. We are looking at some software/hardware products that will let us establish a TCP/IP network here at Va. Tech. We are planning to connect the 3090 to SURANET and eventually we'll do the same for our Vax systems. I am looking at the WISCNET package and at Fibronics (formerly Spartacus?) KNET 200. I am very little info on the Wollongong software for the Vax systems. I would like to hear from anyone who has had any experience with any of these packages. Any information on reliability, vendor support, installation problems, your opinion of the products, etc. would be greatly appreciated. You can respond to this list or to me directly. My name and address is: Randy Marchany Vax Systems Manager Va. Tech Computing Center 116 Burruss Hall Blacksburg, VA 24061 703-961-6327 BITNET: MARCHANYRC@VTVAX3, MARCHANYRC@VTVAX5, HAND2@VTVM1 Also, if there are any other products out there that will perform the same functions, I'd like to hear about them. Thanks again.