VTTTELTY@FINFUN.BITNET.UUCP (12/16/86)
ETHERNET DRIVER NEEDED FOR INTEL SYS310/RMX86/iSBC552 I have implemented an IP-level gateway to be used between Ethernet type LAN's. The gateways communicate through X.25 network. The software runs on the Intel SYS310 (with RMX86) and the LAN-interface card is Intel's iSBC552 (with INA961 software). The problem is that the INA961 software understands only IEEE 802.3 conforming packets, while most other devices on the LAN talk Ethernet. I am interested in knowing if anyone else has had the same problem and has anyone found good solutions. My current solution is to use a VAX (VMS) as a gateway between Ethernet and IEEE 802.3. Santtu Maki Telecommunications laboratory Technical Research Centre of Finland Otakaari 7B SF-02150 Espoo, Finland VTTTELTY@FINFUN.BITNET