starner@burdvax.UUCP.UUCP (03/31/87)
Since converting to 4.3BSD I have been having problems using ftp to
parcvax.xerox.com (i have discovered this problem at no other
sites, yet). I can connect to the site fine, login anonymous,
ls works -- but "dir" and the "*get" functions hang, finally timeout
with the message "connection reset by peer". This behaviour is
exhibited on all hosts on our internal network also.
Here is a sample:
<burdvax:2> 101% ftp parcvax.xerox.com
Connected to parcvax.xerox.com.
220 parcvax.xerox.com FTP server (Version 4.105 Mon Jun 2 17:55:28 PDT 1986) ready.
Name (parcvax.xerox.com:starner): anonym,ous mous
331 Guest login ok, send ident as password.
Password:
230 Guest login ok, access restrictions apply.
ftp> ls
200 PORT command successful.
150 Opening data connection for /bin/ls (10.5.0.96,1133) (0 bytes).
.cshrc
.login
.plan
.
.
.
xns
226 Transfer complete.
143 bytes received in 1.9 seconds (0.072 Kbytes/s)
ftp> dir
200 PORT command successful.
150 Opening data connection for /bin/ls (10.5.0.96,1134) (0 bytes).
netin: Connection reset by peer
226 Transfer complete.
ftp> quit
221 Goodbye.
<burdvax:2> 102%
Does this problem seem familiar to anyone? I can ftp to other 4.3 sites,
4.2 sites, TENEX, etc.... with no problem.
Also, I can get files using a Xerox 1109 using TCP/IP from parcvax.
But not from any of my unix hosts on my network.
Any hints anyone can give would be appreciated.
--
Mark Starner starner@burdvax.prc.unisys.com
Unisys Corporation/Paoli Research Center {seismo,sdcrdcf}!burdvax!starner
Paoli, PA