jdg@elmgate.UUCP (Jeff Gortatowsky) (07/09/86)
I tried the patch posted here from a fella that had talked with Manx over
the phone, on patching cc and make for Kickstart 1.2. It didn't work for
me. Maybe others will have better luck.
--
Jeff Gortatowsky {allegra,seismo}!rochester!kodak!elmgate!jdg
Eastman Kodak Company
<Kodak won't be responsible for the above comments, only those below>mykes@3comvax.UUCP (07/12/86)
In article <492@elmgate.UUCP> jdg@elmgate.UUCP (Jeff Gortatowsky) writes: >I tried the patch posted here from a fella that had talked with Manx over >the phone, on patching cc and make for Kickstart 1.2. It didn't work for >me. Maybe others will have better luck. > > >-- >Jeff Gortatowsky {allegra,seismo}!rochester!kodak!elmgate!jdg >Eastman Kodak Company ><Kodak won't be responsible for the above comments, only those below> It worked for me fine... I compiled the patch program under 1.1 and ran it under 1.2. I did encounter a few wierd problems, like "Exec failure" but that turned out to be a problem with 1.2 Paths and where I had c: assigned. If this is your problem, then your patch did work, you should try playing around with your environment. Hope this helps.
gary@mit-eddie.UUCP (07/13/86)
<> I'm the one that posted the Manx patch and hadn't tried it at the time; however, I've tried it since then and it worked. One possible problem is with the "\X" field... that may have to be "\x"... at least that is what I used when I finally tried it and it worked. Up -n- running on 1.2! Gary