[net.ham-radio.packet] Correction to Icom HT to TNC schematic

ka2ugq@ky2d-2.UUCP (Tom) (01/26/86)

I made a big mistake in the previously-posted schematic of
the connection between an Icom IC-2A, 2AT, or 02AT and a
packet radio TNC, RTTY afsk unit, or another microphone.
The resistor and capacitor were backwards.  The correct
schematic follows:

                         Audio
                       from TNC*        PTT     Ground
                           |             |         |
                          ---            /         |
                     (C1) ---       (R1) \         |
                           |             /         |
                           |             |         |
          Icom HT          |             |         |
            mic input------+-------------+         |
                                                   |
             ground--------------------------------+

C1 - 0.47 uf capacitor
R1 - 25K resistor

* TNC or RTTY afsk or another microphone or whatever you are
  interfacing to your Icom HT.

-Tom KA2UGQ

  uucp: ..!ihnp4!bellcore!mtunh!ky2d-2!ka2ugq
    or: ..!ihnp4!bellcore!ka9q!tom
packet: KA2UGQ @ WA2SNA-1
  bomb: 40 41 N, 74 25 W
 2m FM: 145.750 MHz (local simplex)