sambo@ukma.UUCP (Inventor of micro-S) (07/16/85)
I am writing a compiler for a language I have designed. The purpose for this language is to make available all the facilities of the IEEE standard 754 for binary floating-point arithmetic, in a high-level language, including exception handling, flags, precision and rounding modes, etc. I would like to write this compiler for some machine that has IEEE floating-point arithmetic "built-in," and at this moment in time, I have access to IBM PC/ATs and AT&T 3B2s. I have worked with the 8087 chip before, and I know all the details I need to know for writing a code generator for the iAPX86/iAPX286 families. I would like to know if there is any documentation on how the floating-point emulator on the 3B2 works, and if all the flags, modes, etc. are accessible, and how to obtain this information. Actually, I would not mind getting a hold of the instruction set for the processor used in the 3B2/300, since I don't know what the differences might be between it and the instruction sets for the WE32100 (for which I have already ordered a data sheet) and the 32001(?) (which is used in the 5620 ter- minal). I know similar questions have been posed on the net before, but I never did find out any satisfactory answers to those questions. ----------------------------------------- Samuel A. Figueroa, Dept. of CS, Univ. of KY, Lexington, KY 40506-0027 ARPA: ukma!sambo<@ANL-MCS>, or sambo%ukma.uucp@anl-mcs.arpa, or even anlams!ukma!sambo@ucbvax.arpa UUCP: {ucbvax,unmvax,boulder,oddjob}!anlams!ukma!sambo, or cbosgd!ukma!sambo "Micro-S is great, if only people would start using it."