[net.micro.mac] Tilde for MacTerminal 2.0

jimb@amdcad.UUCP (Jim Budler) (03/20/86)

I saw a few people ask again about how to make the '~' key easy to
use on MacTerminal 2.0, so I'll describe the process again:

	1. Use ResEdit (I think any version, but 0.7 and up for sure)
	2. Open MacTerminal 2.0
	3. Open KICH
	4. Open KICH ID=256
	5. Look for the following sequence:
		1B 60 1B 7E  1B 60 1B 7E
		1B 60 1B 7E  1B 60 1B 7E

	6. Replace it with:
		1B 60 7E 7E  1B 60 7E 7E
		7E 60 7E 7E  7E 60 7E 7E

	7. Close KICH ID=256
	8. Close KICH
	9. Close and save MacTerminal 2.0

The ~/` key now will work as follows:

	alone		->	ESC
	SHIFT		->	~
	CAPSLOCK	->	ESC
	COMMAND		->	`

Have fun.

-- 
 Jim Budler
 Advanced Micro Devices, Inc.
 (408) 749-5806
 Usenet: {ucbvax,decwrl,ihnp4,allegra,intelca}!amdcad!jimb
 Compuserve:	72415,1200