tomj@oakhill.UUCP (07/11/86)
I believe I have found a problem with using the new (3.1) LaserWriter drivers on a Mac512K...edit a Draw document, draw a figure using the polygon tool, print it -- prints O.K., choose smoothing on this figure and print it again -- crashes the system with ID 02. This only seems to happen on 512K's. Overall configuration is: 15 assorted Mac's (512K's and Plus's), 2 Laser Writers (not pluses), all attached on appletalk and using MacServe with about 6 of the Macs (4 Plus's and 2 512k's) set up as servers and the rest as user nodes. The servers use a mix of Plus's with Peak Plus30's and HD20's and the 512k's use HD20's. The problem occurs ONLY on 512k's using either Sys 3.2/Finder 5.3/Driver 3.1 *or* Sys 3.1.1/Finder 5.2/Driver 3.1. Haven't tried Sys 3.2/Finder 5.3/ Driver 3.0. I believe the problem to be one of incompatibility between Driver 3.1 and the 64k ROMs in the 512k's. Another variation on the problem is to paste the smoothed figure into a Write document and print. The document prints, but no smoothed figure! Any assistance/ideas on what to try next would be greatly appreciated. Thanks in advance. Tom Johnson (ut_sally!oakhill!tomj)