pedz@smu.UUCP (12/06/84)
I made an offer of an FFT program but I never sent it to the net bacause of lack of interest. The conditions for receiving a copy was quit simple. The program has been tested and works but I was never satisfied with the answers that it produces. I never found a sequence of input points with a specified output. So the condition was to test the FFT program and determine if it did indeed produce the correct answers. If it did or did not, I wanted to know the results and how you determined them. Perry convex!smu!pedz p.s. This is not intended for production or any extremely serious work. It is written in C and is as fast as I can make it without going to an extreme amount of trouble.
john@wvlpdp (02/07/86)
Try contacting: Catalytix Corporation 55 Wheeler Street Cambridge, Mass 02138 617-497-2160 Inquire about: The Safe C Standalone Interpreter The Safe C Dynamic Profiler The Safe C Runtime Analyzer My company wanted to buy the above mentioned items, but Catalytix could not do a port to a PDP 11/73 that would perform adequately and therefore would not sell us the products. I saw these packages demonstrated at the Dallas Uniforum. They appeared to do what the advertising claimed. John A. Ebersold World Video Library ihhp4!convex!ctvax!trsvax!doc!wvlpdp!john 2747 Airport Freeway Fort Worth, Texas 76111
masson@convex.UUCP (02/25/86)
Try "pcvt100" from: Mark C. DiVecchio 9067 Hillery Drive San Diego, Ca 92126 convex!masson 214-952-0200