vasoll@okstate.UUCP (10/29/84)
Has anyone out there written a plot(3g) library (similar to the HPGL library recently posted) that works with DEC graphics terminals such as the GIGI and VT125? I think they both speak the same graphics language (Regis?). Please MAIL an OFFER to send the source, I will try to choose the closest system (to minimize the amount of traffic through the net). If I don't hear anything in a week or so, I will undertake the project and offer the results to the net. Thanks in advance, Mark Vasoll Oklahoma State University Computer Science Department ARPA: vasoll%okstate@csnet-relay UUCP: ihnp4!unm-cs!isucs1!okstate!vasoll
vasoll@okstate.UUCP (11/08/84)
What follows is a summary of what I have received in response to my
net.wanted.sources article requesting a plot(3) library for Regis.
Tim Morrissey (ihnp4!druxt!timothy) - has what he calls a very limited
thrown-together library for line drawing. He is willing
to share what he has if I want to implement a Regis library.
Jim Mayer (rochester!mayer) - has a library that has only been tested
on vt125 terminals.
Steve Sutphen (ihnp4!alberta!steve) - has an extended plot(3) implementation
that has been tried on vt125s and vt240s. He offers it to
any requester with proof of source license.
Lee Ward (convex!unmvax!lee) - sent me his implementation of the plot(3)
library for Regis (thank you Lee!). I have been running it
for a few days now and it seems to be just what the doctor
ordered.... He invites me to do whatever I please to it, but
would like to hear of any additions.
Greg Cline (decvax!dartvax!cline) - suggests that I write to Kiewit
Computation Center at Dartmouth. They have "lots" of gigi's
and plotting packages, but he didn't know the specifics.
Chip Rosenthal (cbosgd!t4test!chip) - is running vt240s (in Tektronix 4014
mode and requests that I forward this list (here it is...)
Jim Rees (apollo!rees) - has a program that reads plot(5) files and plots
them on a Gigi. He says that it could be converted to a
set of plot(3) routines without too much trouble.
----------------------------------------------------------------------------
Thanks to all of you who replied. And I wondered if anyone else in the
whole world uses Regis!!
Mark Vasoll
Oklahoma State University
Computer Science Departmentezf@bbnccv.UUCP (Ed Frankenberry) (05/23/85)
Has anyone already written plot library routines to convert plot(5)
output into QMS "quic" graphics? We would like to locate a device
filter that can be used with both the QMS 1200 and 2400 laser printers
by Quality Micro Systems. (The environment is 4.2BSD on a VAX, but
this type of filter should be portable).
Thanks in advance,
Ed Frankenberry
{ihnp4,decvax}!bbncca!ezf
ezf@bbn-unix.ARPAunfres@hscfvax.UUCP (Janet) (12/03/85)
I am trying to use the plot(3X) graphics library on the Vax. I would like to load my program with the device-independent plot library (-lplot) and then run it with a filter specific to my terminal, e.g., cc -o program program.c -lplot program | plot -Ttermtype as described in the UNIX manual (BSD 4.2). My problem is that there are only four or five different terminals for which filters are provided, none of which I have. Specifically, I would like to run my program using an IBM PC/XT or a DEC Professional as my terminal. Does anyone know of additional plot filters or device-specific plot libraries that are compatible with plot(3X)? Thanks,
unfres@hscfvax.UUCP (Janet) (12/04/85)
Postnews seems to have eaten the signature on my original article... Janet Abbate UUCP: ..decvax!linus!harvard!popvax!janet ARPA: popvax!janet@harvard.arpa P.S. I've heard of a database called "graphcap" that might provide the necessary information to use plot with other terminals. Anyone know about it? Alternatively, does anyone know how to make an IBM PC/XT or a DEC Professional emulate one of the devices recognized by plot(1): Tektronix 4014 storage scope DASI Hyterm 450 terminal DASI 300 or GSI terminal DASI 300S terminal ? I'm not familiar with most of these so it may be a rediculous question, but I thought I'd try anyway. Thanks.
mrl@oddjob.UUCP (Scott Anderson) (05/12/86)
Sender:
I am looking for an implementation of the plot(3) routines using
HP-GL, the Hewlett-Packard Graphics Language as implemented on,
for example, the HP 7470 Graphics Plotter. A plot(5) filter
would also be useful.
--
*
* *
* * * * Scott Anderson
* * ** ihnp4!oddjob!kaos!sra
* * * * * * * *
* * *
* * * * * * * * * * * * * * * * * * * * * * * * * *roy@phri.UUCP (Roy Smith) (05/14/86)
In article <1323@oddjob.UUCP> sra@oddjob.UUCP (Scott R. Anderson) writes: > I am looking for an implementation of the plot(3) routines using HP-GL We did that here a while ago. Anybody who want's a copy should write me for details. -- Roy Smith, {allegra,philabs}!phri!roy System Administrator, Public Health Research Institute 455 First Avenue, New York, NY 10016