stephan@kontron.UUCP (Stephan W. Wendl) (08/09/86)
Two 68000 Multibus systems for sale : Each system comes with the following parts 1. one 68000 CPU board with 8Mhz CPU memory management similar to SUN 1 Board two serial ports timer 64 Kbyte of Prom (boot prom) 2. one serial card with 4 serial ports RS232 one DMA/sio (multiplexed) 2 serial ports RS422 one DMA/direction/sio 3. one controller board with sasi hard disk controller DMA controlled 8" Floppy controller (IBM format double sided, double density) printer port (parallel) 4. two memory boards 512 Kbytes each with ECC controlled memory (3bits for recovery) 5. one 8" double sided floppy drive (half height) 6. one 5Mbyte hard disk (to fill the space) 7. one multibus cabinett with 7 multibus slots 1 power supply (switched) 2 fans cabeling for 8 serial boards and ethernet (includes cable) centronics printer connector space for two harddisks (vertically mounted) Size (not exact): 10" x 17" x 21" 8. schematics, boot prom listing and some format utilities in source and binary. (programs in listing and machine readable form) The boot prom support boots from hard disk, floppy disk and via serial line. S-records can be loaded via serial line. Included are also complete hardware diagnostic routines. Configuration via switches for direct boot sequence or monitor after power up. Device driver in boot prom. Further commands to examine and set memory. Asking $1000 each. Discount 10% if you purchase both. Prefer if you pick it up but can be shipped within USA (I would take it apart for easier shipping and protection of the parts. It's easy to assemble) If there are any question of technical kind feel free to ask. Please reply via e-mail or call me: Stephan W. Wendl private (415)-3 255 377 after 7pm or leave message I call back work (415)-965-7020 x136 ^ this is ~ 35 miles south of San Francisco in Palo Alto/Mountain View