info-mac@uw-beaver (info-mac) (11/19/84)
From: Neil J. O'Neill <oneill@lll-crg.ARPA> When using Macterminal with a Prometheus modem, set configuration switch 3 on the modem to ON. This forces the modem to use the Hayes Compatible result codes that MacTerminal expects. If you do not set this switch then MacTerm prints "NO MODEM CONNECTED" error messages that may provoke you into doing unnecessary testing of your Mac, modem cable, or modem. With this modem setting you should also use the Apple phone settings in Macterminal as your Promodem will now look exactly like an Apple 1200 baud modem to your Mac.