[ont.micro.mac] Pulling those RAMs

info-mac@utcsrgv.UUCP (info-mac) (07/11/84)

Date: Mon, 09 Jul 84 17:17 PST
From: uw-beaver!Dennis.Griesser@HIS-LA-CP6.ARPA
To: INFO-MAC@SUMEX-AIM
Subject: Pulling those RAMs

Edward.Tecot is quite correct.  When dealing with an expensive (and
presumably delicate) printed circuit board, you don't want to take
any chances.  Cut the chips out and carefully clean up afterwards.

If you care about the old chips, do the job neatly and you can
probably solder them on to DIP headers.