ronbe@tekred.UUCP (Little Guy) (07/01/85)
In the Intel hex version I posted, I forgot to mention that the 16th byte (which is 77H) may be changed to 55H for 300 baud operation. The 77 is used for 1200 baud. For other baud rates, see page 46 of the "Operation and BASIC Language Refernce Manual". To change your version to 300 baud after successfully building the TERM/CMD file, enter DEBUG, enter "F" followed by TERM/CMD, then press M. Move the cursor to the last byte of the first line, then type "55". Press RETURN to write the change back to the disk, then BREAK twice to leave DEBUG. Hope this didn't cause problems for you 300 bauders. -Ron -- Be careful tonight, drive, don't park. Remember, accidents are the cause of people. ...tektronix!tekred!ronbe (Ron Bemis)