johnw@reed.UUCP (John Windberg) (07/25/86)
Does anyone have a termcap entry for comm trsdos6.2 model 4? Someone sent me one, but it seems uncompatible with our unix. Also hoe do I set baud etc. on comm? I do not have trsdos6.x manuals. thanks in advance. johnw
msl5864@ritcv.UUCP (Michael S. Leibow) (07/27/86)
In article <3910@reed.UUCP> johnw@reed.UUCP (John Windberg) writes: >Does anyone have a termcap entry for comm trsdos6.2 model 4? M4|trs4|trs-80 model 4:\ :bc=^X:bw:cr=^]:nl=^Z:cl=^L:up=^[:am:bs:\ :ho=\034:do=^Z:kb=^H:kd=^J:kl=^H:kr=^I:ku=\013:\ :li#24:co#80:nd=^Y:ce=^^:so=\020:se=\021: You can set your baud rate using setcom. To see what it is set at don't give it any arguments. To set baud rate type "setcom (baud=1200)" and it will change. Once you have your comm port the way you like it, and everything else on your disk is fine, than type "sysgen" and it will permanently configure your setup. -- Michael S. Leibow UUCP: {allegra,seismo}!rochester!ritcv!msl5864 CSNET: msl5864%rit@csnet-relay.ARPA