mike@amdcad.UUCP (Mike Parker) (03/12/85)
Has anyone ever tried to spray contact cement? I'm really tired of brush strokes telegeaphing through my veneer and am considering trying to psray the stuff with a "wagner" or similar airless sprayer. Mike @ AMDCAD
snafu@ihlpm.UUCP (wallis) (03/12/85)
> Has anyone ever tried to spray contact cement? I'm really tired of > brush strokes telegeaphing through my veneer and am considering > trying to psray the stuff with a "wagner" or similar airless > sprayer. > > Mike @ AMDCAD Try using a fine or medium napped paint roller. They give much more uniform results than a brush. I have never tried spraying contact cement, but I suspect that it is too gooey to spray, or would not be effective if thinned enough to spray.
traite@wanginst.UUCP (Paul Traite) (03/15/85)
> Has anyone ever tried to spray contact cement? I'm really tired of > brush strokes telegeaphing through my veneer and am considering > trying to psray the stuff with a "wagner" or similar airless > sprayer. > > Mike @ AMDCAD Have you tried using "spray-mount"? If you don't need a strong bond, it might be just the thing. Spray-mount is used by graphics artists for glueing cardboard models and paper layouts; any good arts supply store should carry this stuff. Paul Traite Wang Institute Tyngsboro, MA