[net.news.adm] Line eater bug rears its ugly head again

jhc@hou5g.UUCP (Jonathan Clark) (01/14/85)

<>
The following two articles appeared at this site apparently
truncated. The hou5* machines are not responsible (I hope!).
Of course, as the sites common to the two articles are
backbone, it could be one of ours. There was another article
posted the other day about the bug but unfortunately there
were no sites common to the three articles. Anyone at ariel,
vax135, houxm or ihnp4 care to comment?
Jonathan Clark
ATT ISL Holmdel NJ

First article:

> Relay-Version: version B 2.10 5/3/83; site hou5g.UUCP
> Posting-Version: version B 2.10.1 6/24/83; site cbscc.UUCP
> Path: hou5g!hou5h!hou5a!hou5d!hou5e!hou5f!ariel!vax135!houxm!ihnp4!cbosgd!cbsck!cbscc!blt
> From: blt@cbscc.UUCP (Brian L. Tymchak)
> Newsgroups: net.auto
> Subject: Re: speedo rates, Chevy style
> Message-ID: <4576@cbscc.UUCP>
> Date: Fri, 11-Jan-85 08:16:04 EST
> Article-I.D.: cbscc.4576
> Posted: Fri Jan 11 08:16:04 1985
> Date-Received: Sat, 12-Jan-85 17:10:48 EST
> References: <3101@ucla-cs.ARPA> Having put a little stint in at a local Chevy dealer parts department
> Organization: AT&T Bell Laboratories <SCCS>, Columbus
> Lines: 11
> 
> before moving into a real job, I know that Chevrolet speedometer gears
> are differentiated by the number of teeth on the gear; I imagine this
...etc

The other one is:

> Relay-Version: version B 2.10 5/3/83; site hou5g.UUCP
> Posting-Version: version B 2.10.2 9/18/84; site amdcad.UUCP
> Path: hou5g!hou5f!ariel!vax135!houxm!ihnp4!amdcad!phil
> From: phil@amdcad.UUCP (Phil Ngai)
> Newsgroups: net.lan
> Subject: Re: Overall failure rates of Sytek pcp cards (really IBM 7171)
> Message-ID: <517@amdcad.UUCP>
> Date: Fri, 11-Jan-85 21:26:54 EST
> Article-I.D.: amdcad.517
> Posted: Fri Jan 11 21:26:54 1985
> Date-Received: Sat, 12-Jan-85 13:16:40 EST
> References: <265@harvard.ARPA>
> Distribution: net
> Organization: AMDCAD, Sunnyvale, CA
> Lines: 13
> 
> > thorns in our side.  One is the Series 1 protocol Converter having
> > problems with both baud rate conversions and dtr (I understand the
...etc