uisdrb@sw1e.UUCP (1826]) (03/16/89)
I am having a problem running pathalias on my 3B1. The system has 2Meg. of RAM, 67Meg. Hard drive and is operating with the 3.51a OS. I am using HoneyDanBer from the STORE and am using the OBM. The pathalias version I am using is 9.1. This program has run successfully in the past. The problem started about a month ago. The program will either panic trap or hang the machine so that I have to do a manual reset to regain control. The following is an excerpt from my /usr/adm/unix.log. NMI (parity error) at 0x1A46CA (*hpte: 0xE1FB) Wed Mar 8 21:34:35 1989 NMI (parity error) at 0x606CA (*hpte: 0x41FB) Wed Mar 8 22:18:18 1989 NMI (parity error) at 0x1576CA (*hpte: 0xC1FB) Wed Mar 8 22:18:34 1989 NMI (parity error) at 0x976CA (*hpte: 0x41FB) Wed Mar 8 22:47:00 1989 NMI (parity error) at 0x15C6CA (*hpte: 0xC1FB) Tue Mar 14 21:20:58 1989 NMI (parity error) at 0x1566CA (*hpte: 0xE1FB) Tue Mar 14 21:38:46 1989 NMI (parity error) at 0x606CA (*hpte: 0x41FB) Tue Mar 14 22:07:15 1989 NMI (parity error) at 0x1566CA (*hpte: 0xC1FB) Tue Mar 14 22:07:30 1989 NMI (parity error) at 0x606CA (*hpte: 0x41FB) Wed Mar 15 06:36:37 1989 NMI (parity error) at 0x1566CA (*hpte: 0xC1FB) Wed Mar 15 06:36:52 1989 I should probably mention that I have used both the malloc that came with the pathalias package and the one that came with the system as indicated in the config.h file. I will appreciate any help or suggestions that might help resolve this matter. Ray Bretthauer {rutgers, clyde}!bellcore!sw1e!uisdrb