k9un@iwsl7.UUCP (08/04/83)
I just purchased a new Apple IIe. I have had a vanilla Apple II for a couple of years now and have recently added a generic Z80 card to add flexibility to my system. My IIe has an 80 column extended card, a Super Serial Card, 2 disks and a printer interface. (Besides the Z80 card)> When I purchased the IIe, the dealer said that their were problems with the IIe and the Z80 cards. He didn't elaborate on the kinds of problems, but he said that the card may not work in the IIe. He indicated that some cards worked on some IIe's, however. I noticed that (particularly) when I am in 80 col mode (cp/m or Apple DOS), I occasionally get garbage characters (or perhaps just dots or groups of 4 dots in a square) that appear on the screen. They don't seem to do any interferring with my program execution, but they are annoying (esp. when I am using it in terminal emulation). I ran a quick test this morning, and I found that I can get the garbage by looping on the catalog cmd in 80 col mode (just once in a while a char pops up). I removed the Z80 card and for the next 3 or 4 minutes there were none. Upon replacing the Z80 card, they again appeared. I will continue testing, but I wonder if anyone out there has had similar experiences and/or know of any fixes? I will post a summary to net.apple if there is sufficient response. Wes Ague Bell Labs, Naperville, Ill. (312)979-7188 or unix mail
k9un@iwsl7.UUCP (08/04/83)
I forgot to post a machine name.....send comments to iwsl7!k9un Wes Ague