[net.micro.cbm] FontMaster II: Help!!!!!

aronov@csd2.UUCP (Boris Aronov) (02/19/86)

I got hold of a copy of FontMaster II. The program seems to be working OK.
However I encountered the following problems/glitches and I wonder if someone has seen them before:

	1. A couple of pages from the manual (namely pages 3&4) are missing.
	2. The package includes a second disk (supposedly a backup), but the program would not run off of it.
	3. I could not find the command to switch between setup files #1 & #2 in Word Processor.
	4. I am using Cardco +G interface with Microline 92 printer,
	and when I set those in the setup program and then do a "test
	this setup", everything comes out right except the "A" and "B"
	that should be printed "1 inch apart" come out next to each other.
	Moreover, in the "demo" file all the fonts come out more or
	less as expected except the left margin of the output is 1-1/2
	inch wide and the lines get cut off on the right. Also, the spacing of
	the fonts looks suspicious--10 cpi fonts look more like 8 cpi, etc.

If anyone  could send me a copy of the missing pages of the manual
and/or suggest a solution to the above problem, please send mail to me
at ...!cmcl2!csd2!aronov or aronov@nyu-csd2.arpa on Arpanet. I'll
summarize the responses to the net if there's enough interest. And, by
the way I want to mention that a friend of mine tried the FontMaster II
with his Commodore MPS-801 printer, the resulting fonts were
outrageously bad and virtually unreadable.

Any help would be greatly appreciated.
						Boris.