dwl10@amdahl.UUCP (Dave Lowrey) (03/04/86)
I am looking for a Painting/Drawing program for my C64. The following
features are required:
The ability to print my drawing on my Gemini 10X printer.
The ability to put text in any position on the drawing.
Automatic generation of circles, given a center and radius.
Automatic generation of Rectangles(sp?), given a corner, height,
and width.
Automatic generation of lines, given both endpoints.
"Freehand" drawing.
Multiple width lines.
The ability to save and recall drawings.
The following features are highly desirable:
Rubberbanding.
The ability to define an "object", move it around the page, multiply
it, save it to disk and re-call it.
Shading
Multiple text fonts
Text rotation
Not required at all:
Color (It's going to a black & white printer!)
If you have a drawing program, or even if you have only heard of one, I would
like to hear from you. Please try to rate it acording to the above
mentioned features. If it has additional features, please mention them. And
I would also like a brief review on how "good" it is.
Please E-Mail responses. I will post the results if requested.
Thanks in advance......
--
-------------------------------------------------------------------
Dave Lowrey
"To vacillate or not to vacillate, that is the question....
....or is it?"
...!{ihnp4,cbosgd,hplabs}!amdahl!dwl10
[ The opinions expressed <may> be those of the author and not necessarily
those of his most eminent employer. ]