W8SDZ%mit-mc@sri-unix.UUCP (07/07/83)
From: Keith Petersen <W8SDZ@mit-mc> Because of time restrictions I was only able to upload the MDM711.LBR file previously. My appologies to those who were inconvienced by having to take the whole LBR file to get just a few of the member files. The previously-uploaded .LBR and .AQM files have been moved to AR100:W8SDZ; where they will remain available for a few more days and then will be deleted. The following files are now available on MIT-MC: AR61:CPM; MDM711 ACASM -- 7/6/83 04:16:57 MDM711 APASM -- 7/6/83 04:24:33 MDM711 COM -- 7/6/83 03:35:35 MDM711 DOC -- 7/6/83 03:34:08 MDM711 DPASM -- 7/6/83 04:36:17 MDM711 GPASM -- 7/6/83 04:41:24 MDM711 H8ASM -- 7/7/83 04:35:48 MDM711 HZASM -- 7/7/83 04:40:04 MDM711 INF -- 7/6/83 03:55:41 MDM711 KPASM -- 7/7/83 04:43:18 MDM711 MDASM -- 7/7/83 04:46:30 MDM711 NEASM -- 7/7/83 05:02:08 MDM711 NMASM -- 7/7/83 05:06:30 MDM711 OSASM -- 7/7/83 05:09:08 MDM711 PMASM -- 7/7/83 05:14:10 MDM711 TVASM -- 7/7/83 05:17:59 MDM711 TXT -- 7/2/83 18:02:38 MDM711 UPD -- 7/6/83 04:00:58 MDM711 XEASM -- 7/7/83 05:22:27 The following excerpt from MDM711.INF will explain what each of the files is for. TOPIC : MDM711 MODEM PROGRAM INSTALLATION INFORMATION FROM : IRVIN M. HOFF W6FFC This program is based on one originally written by Ward Christ- ensen in September 1977. It has since undergone a considerable number of changes. Recent changes include auto-dialing and continuous redial- ing for the Hayes 300 or 1200 Smartmodem and the U. S. Robotics, along with the standard PMMI 103 routines the program has supported since its inception. NOTE: Special configuration files are being added for specific types of computers. Several are available as shown below. Others will be provided for popular computers using external modems. This file will be updated accordingly. To adapt this version to your equipment, you will want to get some of the following programs: Program name Squeezed Name Purpose MDM711.ASM MDM711.AQM (source code file) MDM711.COM MDM711.OBJ (object code file) MDM711.DOC MDM711.DQC (how-to-use file) MDM711.INF MDM711.IQF (information file) MDM711AC.AQM MDM711AC.AQM (AppleCat II overlay file) MDM711AP.ASM MDM711AP.AQM (Apple II overlay file) MDM711DP.ASM MDM711DP.AQM (Datapoint 1560 overlay) MDM711GP.ASM MDM711GP.AQM (General purpose overlay) MDM711H8.ASM MDM711H8.AQM (Heath/Zenith H89 file) MDM711HZ.ASM MDM711HZ.AQM (Heath/Zenith Z-100 file) MDM711KP.ASM MDM711KP.AQM (KayPro overlay file) MDM711MD.ASM MDM711MD.AQM (Morrow MD overlay file) MDM711NE.ASM MDM711NE.AQM (NEC PC-8001 overlay file) MDM711NM.ASM MDM711NM.AQM (Phone number overlay) MDM711OS.ASM MDM711OS.AQM (Osborne overlay file) MDM711PM.ASM MDM711PM.AQM (PMMI S-100 modem overlay) MDM711TV.ASM MDM711TV.AQM (TeleVideo TS-802 overlay) MDM711XE.ASM MDM711XE.AQM (Xerox 820 overlay file) (The minimum would be any pair in one of the examples shown below.) There are several ways by which you can set the proper ports, status pin values, etc. for your equipment. 1) Use your editor, ASM (or MAC) MDM711.COM and and DDT (or SID) with: MDM711xx.ASM (711xx stands for an appropriate overlay) or 2) Use your editor, ASM (or MAC) MDM711.ASM One of those should appeal to you. The program is designed to work immediately for PMMI users with no changes - just use MDM711.COM. (You might wish to change some of the available options, however. It is set to use base port 0C0H.) When ready to use the program, type 'H' (for 'HELP'), hit RET and it will display helpful information on the commands. There are so many commands there are several pages. You can abort the display with a CTL-C. (One of the most useful features being CTL-P to toggle your printer on/off.) You can also type a question mark (?) which shows the current parameters. The program has received numerous worthwhile optional features in the past several months. - Irv Hoff