w8sdz%brl@sri-unix.UUCP (01/12/84)
From: Keith Petersen <w8sdz@brl> Date: 01/01/84 11:30:07 From: Bob Plouffe To: Frank Wancho Re: Patching MDM716 for Smart Modem result codes Regarding failure of MDM716 to go to terminal mode after dial commection is made, try changing the SMRESUL1 routine to the following code. I assume you are using a SmartModem which has both verbose and numeric result codes depending on how your modem switches are set. This code will work regardles which way the result code switch is set. I have it implemented this way in my version for the IBMPC and hadn't noticed that it wasn't implemented properly in MDM7xx. SMRESUL1: CALL IN$MODDATP ANI 7FH MOV B,A CPI 'C' JZ CONMADE1 CPI 1 JZ CONMADE1 CPI 'E' JZ GIVLF CPI 4 JZ GIVLF CPI 'N' JZ SMDM1 CPI 3 JNZ SMRESULT This should be a permanent change to MDM7xx and I will put it into the next release. In the meantime, perhaps it should be put on the nets as a patch. Bob Plouffe