reece%nadc@sri-unix.UUCP (02/27/84)
I have been trying to get modem7 working on a Morrow Micro-Decision and am having trouble. I was about to give up and out of desperation, tried an older version (711) and it worked! Does anyone know why 711 would work and 720 would not? I have the newest MD3 model with the software setable baud rates and a Centronics port. I made all the setup routines in the overlay file just "return". I use the Morrow-supplied setup program to change the rate and have the modem program assume it's ready to use. I use the same modem720 program on an H89 and it works fine. Jim Reece REECE@NADC
ssalzman.es@PARC-MAXC.ARPA (02/28/84)
Hi. A friend of mine has an MD-3 and he's running mdm720 with no problems. You shouldn't change anything in the overlay file at all. Just leave all the port equates and modem setup routines in tack. Run setup and make sure the serial port is set to 1200 baud. From there mdm720 will use a divisor to get down to 300 baud. Any more problems let me know. We are in the process of getting the BYE program running on it too. If you have anything on that let me know. - Isaac Salzman. ssalzman.es@parc-maxc
zemon@felix.UUCP (03/12/84)
I have Modem 711 on a Morrow MD3. I had no trouble setting
it up to change baud rates. I do not have to use Morrow's
SETUP program at all.
Contact me if you want a copy of the diskette or more
information.
Art Zemon
FileNet Corp.
...!{ucbvax, decvax}!trwrb!felix!zemon
(714)966-2344