ciaraldi@rochester.arpa (04/23/84)
From: Mike Ciaraldi <ciaraldi@rochester.arpa>
I have a friend who is trying to get BYE working on his
Zenith Z-100 under CP/M-85 or CP/M-86.
We downloaded BYE3.19 and some of the overlays from
SIMTEL20.
We couldn't use the HZ100 overlay directly, becuase he
has a PMMI S-100 plug-in modem, instead of an external
modem connected to the Z-100's serial port.
So, we tried the PMMI overlay.
When we run BYE, it prints a sign-on message.
>From thhen on, we can give it a CTRL-C and it will ask
if we want to ressume or re-boot. Both seem to work.
So, what's the problem? When you call, it doesn't
answer the phone!
The PMMI works all right for calling out, using
MDM728. Has anyone else tried using a PMMI
in a Z-100 with BYE?
Any help would be appreciated.
Address replies to:
Mike Ciaraldi
ARPA: ciaraldi@rochester
Usenet: seismo!rochester!ciaraldi
or
Mike Bentley
Usenet: seismo!rochester!ritcv!aii