[net.micro.cpm] NEED CPD DIAL CODE

"MortonJim"@LLL-MFE.ARPA (05/02/84)

 I have a Signalman Anchor modem, which used controlled pulse dialing. 
This means that there is an RS-232 Pin which if i set the modem is "off hook"
and if i reset the modem is "on hook". You dial a number by pulsing the 
line hi and low for the appropriate number of times for each digit of the 
phone number. 
    I need a 8080 or z80 code to dial this modem, preferably one that is 
compatible with mdm7whatever.  If there are no such codes, I will write one
but would like to avoid re-coding the wheel so to speak.
          Thanks in advance for any help,
                Jim Morton

avrunin@Nalcon.ARPA (05/03/84)

From:  Avrunin <avrunin@Nalcon.ARPA>

The overlay for the apple ][ with Hayes micromodem ][ has a pulse dialing
routine.  It gets a phone number from the input or library and goes on
and off hook the appropriate number of times.  This should give you a 
good start toward what you need.  It is overlay M7AQ-3.ASM  The dialing
part is pretty obvious in it.

Larry AVrunin