Keith Petersen <W8SDZ@Simtel20.ARPA> (11/19/84)
Thanks to Charlie Strom <CSTROM@SIMTEL20> we now have MDM840 for CP/M-86. It is a 16 bit conversion of MDM740. Here is a list of the files available: Filename Type Bytes CRC Directory MICRO:<CPM.CPM86> M8CNFG11.CMD.1 COM 10752 7D80H M8CNFG11.HEX.1 ASCII 26184 05F5H M8GP-1.A86.1 ASCII 8458 40ADH M8HZ-1.A86.1 ASCII 9445 6813H M8IN-1.A86.1 ASCII 10820 4247H M8LIB.CMD.1 COM 3328 1471H M8LIB.DOC.1 ASCII 614 7D3AH M8LIB.HEX.1 ASCII 8112 5857H M8MPMIN.A86.1 ASCII 18523 1372H M8NM-40.A86.1 ASCII 5578 3932H M8RB-1.A86.1 ASCII 10655 F977H M8UPD-1.TXT.1 ASCII 1388 2BA6H MDM840.DOC.1 ASCII 42357 8125H MDM840.H86.1 ASCII 49747 D495H MDM840.NOT.1 ASCII 1395 0C3DH MODEM840.LBR.1 COM 146816 FE07H ^--contains the whole package for those who can FTP ITS-binary files MSUP.A86.1 ASCII 48112 CB1FH MSUP.DOC.1 ASCII 2600 4F0CH Here's the note file: MDM840 Translation of MDM740.ASM for CPM86 and MPM86. This translation follows the same principle of using overlays to adapt MDM8xx to different hardware environments as was so successfully done with MDM7xx. The procedure to adapt MDM8xx to specific hardware has changed somewhat due to the facts that DDT86 cannot be used to overlay H86 (HEX) files and no SAVE command beeing available in CPM86. See MDM840.NOT for details. Required Files: MDM8xx.H86 (xx is Version Number) The Main Program in Hex Form. M8GP.A86 (The General Non-Specific Overlay. or One of the available Overlays for your hardware.) The Translation was MAINLY done by hand as XLT86 (DRs 8080->8086 translator) is virtualy useless with large files. Various routines had to be changed to work properly with CPM86 and MPM86 Please report any bugs to: Alex Soya P.O. Box 121 Melbourne Beach Fl. 32951 or: Melbourne RCPM (305) 2597955