jack@boring.UUCP (08/11/85)
I'm posting this for a friend who doesn't have net access, so please reply directly to him. -Jack. I'm looking for a Z80 disassembler or debugger that runs under CPM. I have one for the 8085, but it screws up badly as soon as a Z80-specific instruction is executed. Any pointers/sources/etc are welcomed. Tom Uyldert, mcvax!vu44!htsa!htsame!dzut (or, if you're lucky, dzut@htsame.UUCP) -- Jack Jansen, jack@mcvax.UUCP The shell is my oyster.
W8SDZ@SIMTEL20.ARPA (Keith Petersen) (08/13/85)
I'm looking for a Z80 disassembler or debugger that runs under
CPM. I have one for the 8085, but it screws up badly as soon as
a Z80-specific instruction is executed. Any pointers/sources/etc
are welcomed.
Yes, Rick Conn write ZDASM, a Z80 disassembler, some time ago. It's
available from SIMTEL20 as:
Filename Type Bytes CRC
Directory MICRO:<CPM.DISASM>
ZDASM15.LBR.1 BINARY 77440 6DB4H
If you are unable to access Simtel-20 because of network restrictions
please remember that MOST of the new files announced to Info-Cpm are
also available on my RCPM Royal Oak (MI) which may be accessed at 300
baud using the 103a modem mode or 1200 baud using either the 212a or
Vadic 3400 modes. The telephone number is (313) 759-6569.
--Keith Petersen
Arpa: W8SDZ@SIMTEL20.ARPA
uucp: ...!{decvax,unc,hao,cbosgd,seismo,aplvax,uci}!brl-bmd!w8sdz
uucp: ...!{ihnp4!cbosgd,cmcl2!esquire}!brl-bmd!w8sdz