jajsumner@watnot.UUCP ((Mark Dapoz)) (07/24/85)
Keywords:ampro intertec superbrain
I have a small problem which some of you may be able to help me with. What
I am trying to do is read and write an Intertec Superbrain disk format on my
Ampro Little Board. The current software on the Ampro doesn't support the
Intertec but I can get it to read and write that format if I know the following
paramaters: Allocation block size (1K/2K)
Bytes per sector
Logical sectors per track
Block shift factor
Block mask
Extent mask or data block allocation size
Max data block number
Max directory entries
Directory group allocation 0
Directory group allocation 1
Check size
Number of reserved tracks
Skew table format
If any of you out there (especialy the people which own Superbrains) could
possibly get any of this information to me it would be very much appreciated.
Thanks
Mark Dapoz
(jajsumner@watnot)mjg@ecsvax.UUCP (Michael Gingell) (08/19/85)
I can get you the info you need if someone else has not already
sent o[Dit to you by now. I have a data base of many disk formats.
Caution - are you aware that data[D[D[D[Dall data on the superbrain is
inverted when recorded on the disk. Can the Apro take care[D[D[D[D[D[D[D[D[D[D[D[D[Dmpro take care of that?.
regards,
Mike Gingell
mail from usenet : ...{decvax,ihnp4,duke,unc or akgua}!mcnc!ecsvax!mjg
from arpanet: decvax!mcnc!ecsvax!mjg@BERKELEY.ARPA
phone day: (919) 850 6131, home: (919) 847 4779