kevinb@SDCSVAX.ARPA (08/21/85)
I am seeking information about a system I am trying to resurrect. The system is as follows: Imsai S-100 power supply, 21 slot motherboard Imsai 8080 frontpanel Cromemco ZPU card (2)Problem Solver Systems RAM16 16k static RAM cards (1)problem Solver Systems RAM65 16K static RAM card Cromemco 8K Bytesaver with the following slots populated: 0 a chip marked: system test +Tarbell init + Zapple 4 a chip marked: Zapple 4 5 a chip marked: Zapple 5 (Tarbell) Canada(with a ~ over the n) CL2400 (1 wire hanging from it) North Star Micro Disk MDC-A4 Imsai SIO (rev. 3) (2) Perkin-Elmer Model 182 drives (51/4") I only have info on the RAM cards and the disk controller card, can get Zapple 1.1 monitor at 1200 baud on the monitor, but cannot boot. Help me restore an antique, and a classic. Please reply if you have any info to: Kevin J. Belles - UUCP {ihnp4,cbosgd,sdcsvax,noscvax}crash!kevinb ~~~~~ ~~ ~~~~~~ - ARPA crash!kevinb@{ucsd,nosc}.ARPA REAL c/o Avalon I, 4037 34th St., Ste 4, San Diego CA 92104 Any info, manuals, support locations would be great. KjB