kevinb@SDCSVAX.ARPA (11/13/85)
I am seeking information on the XCOMP dual-drive hard-disk
subsystem, with an emphasis on trying to get one to work on my
IMSAI 8080 w/ a Cromemco ZPU on CP/M 2.2. Any software, manuals,
suggestions, criticisms, and comments are extremely desirable. I
am currently having thoughts about installing one to use a Tandon
603S @ 5mb 51/4" footprint drive, or perhaps getting a controller
for a 14" footprint 20MB drive, or both. Any suggestions on good
brands of S-100 hard disk controllers would also be helpful, with
an eye to the fact that I am looking for a reliable hard disk
subsystem on an admittedly low budget.
If you have anything to share, please call (619) 282-5661
eves, leave a message to me here, or write me care of the USnail
care of the below address.
Thanks in advance,
Kevin Belles
Kevin J. Belles
c/o Avalon One
4037 34th Street, Ste. #4
San Diego, CA 92104
Disclaimer: Any opinions herein are my own, and in no way
connected with my place of employment. KjB
Kevin J. Belles - UUCP {ihnp4,cbosgd,sdcsvax,noscvax}crash!kevinb
~~~~~ ~~ ~~~~~~ - ARPA crash!kevinb@{ucsd,nosc}.ARPA