NBaheti.es@xerox.ARPA (02/26/86)
I am posting the following message for a friend who is having some troubles. If you want to respond via the Nets, feel free to do so to my account and I'll forward all replies to him within a day. I am not on info-apple, so please reply directly to me or cc me on your reply; thanks. --Arun Baheti arpa: NBaheti.es@Xerox.COM rcpm: 213-530-0670 ----------------------------------------------------------------- I am trying to put together a working MEX 1.14 for the following equipment and am getting nowhere. I can get the MEX to install properly, etc. but then when I get to terminal mode all I can get the system to do is give me the help menu (ESC+?) and exit to command mode (ESC-E). I can't get the modem to receive any data at all from the keyboard. I've tried everything (ie: switching slots, checking cards, power off, unplug, ad naseum in finium); anyone have any ideas? or better yet, a working copy of MEX 1.14 for the below system? Apple //e Apple SSC (dips set ON are: 24567 12345) in slot #2 Micro-Soft Premium Softcard //e in auxiliary slot Disk // controller card in slot #6 Sider 1 10M drive controller card in slot #7 I know the above will work somehow, since I have a MDM7 configured and working (taken off a local RCP/M). I need MEX so I can use the USR Courier 2400 at 2400 baud instead of 300/1200. If you can help out feel free to call me voice at 213-539-9395 or 530-0845 anytime after 2:00pm. Thanks in advance for your help. -----------------------------------------------------------------