jrb@wdl1.UUCP (John R Blaker) (03/07/84)
Hi there. I have the following equipment: Apple ][ AIO Serial/parallel Interface (made by SSM) Hayes Smartmodem 1200 Hayes Terminal program for Apple ][ (Says works with Hayes 300 & 1200) The problem: The terminal program cannot find the modem when the speed on the AIO is set to 1200 baud. It DOES find it when the speed is set to 300. Why? Additional information: The AIO provides the following lines: PIN # Name Function -------------------------------- 1 FG Frame Ground 2 TD Transmitted Data 3 RD Received Data 4 RTS Request To Send 5 CTS Clear To Send 7 SG Signal Ground 8 DCD Data Carrier Detect 20 DTR Data Terminal Ready Does anyone out there in NETLAND have any ideas on this subject? Send replies to me at one of the following addresses: John R Blaker (not evelyn) Ford Aerospace & Communications (Work) Western Development Laboratories Division 3939 Fabian Way Palo Alto, CA 94303 (415) 852-4219 1625 Cedar Street (Home) Berkeley, CA 94703 (415) 524-7083 ...!fortune!wdl1!jrb (UUCP) jrb@FORD-WDL1 (ARPA)