jjsk@ihu1g.UUCP (jim kent) (09/07/84)
I have been running my Apple //e for a year with the Apple 80-col card, the CCS7710 serial card, Hayes 1200 external modem. I use this equipment with ASCII Express software. The problem is that I had borrowed the the CCS7710 board. I bought the Apple Super Serial card for this system and I am having problems geting it to run. I configured the board to 1200 baud, communication mode, no interupts, 8-bit ASCII 2 stop bit no parity. I also replaced the null modem cable used with the CCS7710 board with a cable which provides straight through connections. The board's jumper block is configured for a modem. I changed the comunication driver in the ASCII Express software to the Super Serial Card. When I use the system, the auto dialer outpulses, I get through to the remote computer, but the screen prints garbage, the high speed light on the modem is out and ASCII Express has switched to 300 baud. Is any one out there using such a combination? If so I would like some hints. ..ihnp4!ihu1g!jjsk Thanks, Jim Kent