jcvjp@ihlpg.UUCP (pycroft) (03/13/85)
I've recently bought an Ultraterm 80-column card for my Apple 2+. It
works with Apple DOS and with CP/M, but Apple Pascal will not boot
with the Ultraterm installed (or even inserted, but with the monitor
cable not connected). This is the case for an Apple 1 disk which worked
fine before the Ultraterm arrived, and also for an Apple 1 disk on which
the file SYSTEM.MISCINFO has the 2 paremeter changes:
SCREEN WIDTH = 80 (was 79) and HAS LOWER CASE = TRUE (was false)
This latter disk will also boot with the Ultraterm removed.
The full configuration is:
Apple 2+ with 2 disk drives
Amdek Color 1 monitor
NEC PC 8023A-C printer
Slot Usage:
0 = 16K RAM card (Microsoft)
1 = printer interface (Grappler +)
2 not used
3 = Ultraterm
4 + CP/M card ("Starcard 2.0"....the shift mod wire & clip installed
came with this)
5 not used
6 = dual disk controller (Apple)
7 not used
I would be grateful for any suggestions as to how to solve this problem.